RB26 EXTENDED Crank Collar

Improves contact with Oil pump gear.

Requires machining by an experienced machine shop.

Made by TOMEI.

$127.00

  • 1 lb
  • Available
  • Delivery in 5-8 days1

R32 R33 R34 RADIATOR BRACKET KIT

Platinum Racing Products billet radiator brackets.  Will fit all R32 and R33 Nissan Skylines.

$158.00

  • 1 lb
  • Available
  • Ships within 1-3 days1

PRO Series RB Trigger kit

  • 1 piece 36-2 trigger wheel and bottom crank gear assembly.
  • MoTeC reluctor (with MoTeC support)
  • Bottom sensor mount
  • All plugs, pins, gauze and heat shrink required.
  • Teflon shielded twin core wire.
  • Bolts and general hardware

$1,021.00

  • 8 lb
  • Available
  • Ships within 1-3 days1

RB R35 VR38 COIL BRACKET WITH COIL STALKS (RB20 RB25 RB26)

This coil kit has been specifically designed as a direct drop-in replacement for the OEM RB coils that simply cannot handle increased power modification.
NO COILS OR HARNESS INCLUDED.  SOLD SEPARATELY

prp parts

$399.00

  • 3 lb
  • Available
  • Ships within 1-3 days1

RB R35 VR38 COIL BRACKET KIT (RB20 RB25 RB26)

This coil kit has been specifically designed as a direct drop-in replacement for the OEM RB coils that simply cannot handle increased power modification.
These coil kits incorporate Genuine OEM Nissan R35 GTR Ignition coils and void the requirement for the genuine RB ignitor system.

r35 coil pack upgrade

$995.00

  • 3 lb
  • Available
  • Ships within 1-3 days1

RB Trigger Kit Parts

$347.00

  • 2 lb
  • Available
  • Ships within 1-3 days1

RB CAM AND CRANK COMPLETE TRIGGER KIT WITH CAS BRACKET

$890.00

  • 2 lb
  • Available
  • Ships within 1-3 days1

PRP BLOCK BRACE

- RB26 or any OEM 4WD RB Block select PREC26P-4WD
- RB26 and have removed and welded the OEM RB26 diff housing off the sump to make it 2WD select PREC26P-2WD
- RB26 with RB25 2WD Sump Dry Sump Setup select PREC30D-2WD
- RB25 with OEM RB25 2WD Wet Sump Setup select  PREC30D-2WD
- RB25 with OEM RB26 4WD Sump cut to be used as a 2WD Wet Sump select PREC30W-4WD
RB25 with OEM RB26 2WD Dry Sump select PREC30D-4WD

RD28 / RB30 4WD Wet Sump Block Brace (PREC30W-4WD)

$1,095.00

  • 5 lb
  • Available
  • Ships within 1-3 days1

RB Block Main Cap Integrated Cradle

RB25 RB26 OEM 4WD Block Main Cap Integrated Cradle 4WD (PRECIMC26-4WD)

RB26 Block Main Cap Integrated Cradle 2WD (PRECIMC26-2WD)

RD28 RB30 Wet & Dry Sump Block Main Cap Integrated Cradle 4WD (PRECIMC30-4WD)

RD28 RB30 Wet & Dry Sump Block Main Cap Integrated Cradle 2WD (PRECIMC30-2WD)

$2,100.00

  • 4 lb
  • Available
  • Ships within 1-3 days1

Mechanical Fuel Pump Kit – RB Series (NO PUMP)

This RB Trigger kit has evolved, through research and development to offer precision ignition timing, for high powered and high RPM applications.

$1,268.00

  • 3 lb
  • Available
  • Ships within 1-3 days1

RB MECH FUEL PUMP DOUBLE CAS BRACKET COMPLETE KIT (MINUS FUEL PUMP)

This RB Trigger kit has evolved, through research and development to offer precision ignition timing, for high powered and high RPM applications.

$1,691.00

  • 5 lb
  • Available
  • Ships within 1-3 days1

Kinsler Tough Fuel Pump

These Kinsler Tough Pump fuel pump is engineered to last longer and take less power to drive.

  • 1-piece gear shaft maintains correct clearance between gear teeth
  • Rock-solid housing is good to 400 PSI
  • Flows without cavitation up to 7,000 pump RPM (14,000 engine RPM)
  • All pumps comes with -8 or -10 fittings.

400 series flows to 1100hp on race gas

700 series flows to 1800hp on race gas

800 series flows to 2000hp on race gas

$1,270.00

  • 4 lb
  • Available
  • Ships within 1-3 days1