Nissan S13 S14 Level 5 Axles

The S13 / S14 240SX Level 5 axles feature a Porsche style 108mm inner and outer CV, our high-grade aircraft quality torsional center bars that twist significantly more than a factory unit, allowing them to absorb a great deal of the shock produced by high horsepower applications. These axles also feature our new bolt-on outer stub that fits the factory wheel hubs and precision billet adapter plates with hardware to mount to the factory differential stubs. Price listed is for both axles.

These will handle 900HP!

Part Number: RA8001X5/RA8002X5

$1,650.00

  • 10 lb
  • Available
  • Ships within 1-3 days1

Honda Civic B-series Level 5.9 Axles

Civic EG/EK (ABS hubs) H-Series Level 5.9 Axle/Hub kit (most mount kits except Hasport EGH2/EKH2). The new level 5.9 axle/hub set, similar to our Level 5 system but with some major upgrades, the inner cv and now featuring our new tapered high quality aircraft grade axle bars. We now have created a Pro race worthy system that works with the standard spline size on the differential end, that can be used with Quaife, Wavetrac and other aftermarket limited slip diffs and spools. What we have done is made a new ball & cage inner cv from high quality chromoly. This inner cv now has 6 contact points and is stronger than a Porsche 930 (108mm) cv (same cv used by many high dollar systems). This along with the 33 spline outer and new 36 spline tapered bars makes it the strongest set of axles to date. The Kit comes with both axles and a set of custom hubs that will fit the stock bearing sizes and extended ARP studs. This system is designed for 850WHP and tire size will not affect its strength.
Also, don't forget to check out our intermediate bars and spools also listed on the site. If you need this system custom made please don't hesitate to call/e-mail, we have an entire wall of axle bars in many different sizes and we would be able to make a custom set in a very short time. DSS is dedicated to bringing you the best drivetrain products at a an affordable price. When you're serious look our way.

$1,850.00

  • 10 lb
  • Available
  • Ships within 1-3 days1

GTR R35 Level 5 Front Axles

The Level 5 complete front axles for the GT-R. The axle center bar (the weakest link on the factory front axles) has been upgraded from the small stock 27 spline to our larger 36 spline bars made from high quality aerospace grade material. These axles feature a direct fit outer CV made from a proprietary material, billet inner CV and spline plug into the differential on the male side and a Porsche-style 108mm inner with precision machined adapter plate to mount to the drive flange on the opposite side. Capable of 1000HP and can be used for street or drag with no modifications required.

Part Number: RA8014L5/RA8015L5

$1,790.00

  • 10 lb
  • Available
  • Delivery in 5-8 days1

GTR R35 Level 5 Rear Axle/Diff Stub kit

The GT-R Pro-Level Axle Kit feature a direct fit outer CV made from a high grade proprietary material, Porsche style 108mm CV's on both ends but we have upgraded them to use our signature 30 spline bars with billet 4340 cages, our aerospace
12 month warranty.

Works on 2008-2014 GTR R35 only

$2,555.00

  • 10 lb
  • Available
  • Delivery in 5-8 days1

Supra Turbo 6-Speed 1-Piece Pro-Series Aluminum Driveshaft w

This is our complete 1-piece 4" Aluminum driveshaft for the 1993-1998 Supra Turbo 6-Speed. This is a complete shaft made with 4" tube and replaces the factory rubber couplers with 1350 series u-joints and includes precision billet plates designed to maintain perfect centerline from the transmission to differential and mount to the factory front and rear flanges, along with all hardware necessary for install. Our shaft comes with a 300m stub system mounted into a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end its not all steel) The shaft only weighs 25lbs and come with special 12.9 grade hardware with back up lock nuts to ensure no loose bolts, we have been using this Billet aluminum style plate for over 10 years on thousands of 1000+Hp Supra's-BMW's and many more with out any bolt issues.
This driveshaft is rated to 1000HP and includes our 1-year warranty.

**U.S. Models Only**

Part Number: TOSH5-A-CV

$890.00

  • 40 lb
  • Available
  • Delivery in 5-8 days1